Wascomat Selecta S28/125 - User Manual

WARNING: ALL OPERATING AND MAINTENANCE PROCEDURES SHOWN ON THE NEXT
PAGE OF THIS MANUAL MUST BE FOLLOWED DAILY FOR PROPER OPERATION OF
YOUR WASCOMAT MACHINE.
PLEASE ENTER THE FOLLOWING INFORMATION AS IT APPEARS ON THE MACHINE(S)
DATA PLATE(S).
MAKE CERTAIN TO KEEP THIS MANUAL IN A SECURE PLACE FOR FUTURE
REFERENCE.
MACHINE TYPE OR MODEL
MACHINE SERIAL NUMBER(S)
ELECTRICAL CHARACTERISTICS: ________ VOLTS, _______ PHASE,_______ HZ.
OPERATING & MAINTENANCE MANUAL
WASCOMAT SELECTA
S28/125
S28/185
471 1562-69/03
00.23

Summary

Safety and Warning Signs

Installation

Mechanical Installation

Electrical Installation

Guidelines for connecting the machine to the electrical power supply.

Water Connection

Door Safety Interlock Check

Procedure for verifying the proper function of the door safety interlock.

Function Control Check-Out List

A checklist for verifying all machine functions after installation.

Start-up and Safety Checklist

Final checks before operating the machine for the first time.

Safety Rules

Safety Instructions

Operating Instructions

Maintenance

Daily Maintenance Tasks

Essential daily checks and cleaning procedures for the machine.

Trouble Shooting

Machine Does Not Start

Steps to diagnose and fix the issue of the machine failing to start.

Machine Does Not Extract

Diagnosing and resolving issues with the extraction function.

Continuous Filling Without Stopping

Excessive Machine Vibration

Water Does Not Drain

Troubleshooting steps for when the machine fails to drain water.

Motor Does Not Operate at Wash Speed

Water Does Not Enter Machine

Diagnosing why water is not entering the machine.

Service Information

Fault Code Directory

A list of error codes and their corresponding causes and solutions.

Built-in Service Program

Setting the Service Position

Fault-finding

PCB Completely Dead

Troubleshooting steps for when the main control board is completely non-functional.

PCB Functioning, but Display Dead

Wash Program Cannot Be Selected

Steps to take when wash programs cannot be selected from the control panel.

Machine Will Not Start

Troubleshooting the issue where the machine fails to start upon pressing the start button.

Machine Displays Error Code 01 E

Steps for diagnosing error code 01E (Water level low).

Machine Displays Error Code 02 E

Troubleshooting error code 02E related to the door lock system.

Machine Displays Error Code 03 E

Diagnosing error code 03E (Resistance too high in temperature sensor).

Machine Displays Error Code 04 E

Troubleshooting error code 04E (Short-circuit in temperature sensor).

Machine Displays Error Code 05 E

Steps for diagnosing error code 05E (Water level issue at start of program).

Machine Displays Error Code 06 E

Troubleshooting error code 06E related to EPROM issues.

Machine Displays Error Code 07 E

Diagnosing error code 07E (Slow water heating).

Machine Displays Error Code 08 E

Troubleshooting error code 08E (Slow discharge or insufficient discharge time).

Machine Displays Error Code 09 E

Machine Displays Error Code 10 E

Wascomat Selecta S28/125 Specifications

General

Spin Speed	1200 RPM
Type	Front-loading
Capacity	12.7 kg
Water Consumption	2.9 - 4.9 gallons per cycle (11 - 18.5 liters per cycle) - Varies based on cycle selection
Weight	249 lbs (113 kg)