37
Trouble shooting
The purpose of the trouble-shooting guide is to facilitate the location
and correction of the most common machine problems.
Before the top panel is removed, power to the machine must be
switched off at the main source or at the separate circuit breaker.
At each trouble-shooting attempt, the plug in connectors on the
control panel should be moved in and out in order to eliminate
improper contact due to faulty connection.
Please note that this guide does not include all possibilities, but only
those most likely to cause the symptoms listed.
In trouble-shooting electrical problems, always make certain to have
the proper electrical schematic or wiring diagram at hand. Test for
power using a V-O-M or similiar meter on the AC voltage scale. Test
for continuity with all electrical power off.
To Next Page
Loading...
