Wascomat Selecta S28/125 - Machine Displays Error Code 05 E

Machine displays
error code 03E
Change wiring
Is wiring to
sensor OK?
Yes
No
Are all
connection
pins on sensor
fitted and
providing good
contact?
Yes
No
Change PCB
Rectify
Does sensor
have correct
resistance?
No
Yes
Change sensor
Is edge
connector on
PCB OK?
Yes
No
Rectify
Fault or resistance too high in temperature
sensor. Threshold value is approx. 17.4 k Ω
(-3 ° C). At 20 ° C the sensor's resistance is
approx. 5.8 k Ω .
Does
tempera-
ture reading
in SE correspond
to the temperature
the sensor is
actually in?
Yes
No
Change sensor
Fault-finding
10
95.08