Turn off key
switch and try
again
Machine displays
error code 10E
Is the auxiliary
contact free of
short-circuits?
Yes
No
Timer receives signal that the extraction
relay has operated, even though timer has
given command for wash speed. This check
takes place every time command for wash
speed has been issued during wash stage
(not during drain or extraction stages).
Fault-finding
20
Change relay
Change auxiliary
contact
Is signal cable
free of short-
circuit with
phase?
Yes
No
Rectify
Nej
Has the
key switch
for free wash
been activated
during the wash
program?
No
Yes
Change PCB
No
Yes
No
Yes
Does the
relay jam
(mechanically) in
operated
position?
Has the
extraction relay
operated during
wash stage?
Change PCB
95.08
To Next Page
Loading...
