18
34
33
1860
1861
Fig.
33
Rapid Advance
Phases of the program can be bypassed by using
Rapid advance.
• Hold the RAPID ADVANCE button depressed
until the indicators have gone past the
unwanted stages.
Restarting
If you discover, within five minutes of starting, that
a wrong program has been selected, or that, for
example a wrong garment has been put in with the
wash, then the machine can be restarted without
the wash water emptying out.
A flashing colon in the display panel will indicate
that restarting may proceed.
Change of program
• Push STOP in order to stop the program in
pause mode.
• Choose a new program.
Push START.
Restarting of same program
• Push RAPID ADVANCE through the whole
program until the key symbol is reached. Wait
until the box around the arrow lights up (about
1 min. after final extraction).
• Open the door and remove the offending
garment. Shut the door once more.
• Push START.
WARNING
Remaining wash time will not be shown
after Rapid Advance has been used.
Operating Instructions
Fig.
34
To Next Page
Loading...
