Description of Parts
5
Note : The above illustration is an example only, your version may vary
Remote Control Holder to Wall Installation
• Clean Area prior to installation of Remote Control Holder.
• Press the tape down firmly and evenly and place on wall. Leave for
15 minutes prior to inserting the remote control
Battery Replacement
Remove backing cover of remote
control by sliding downwards.
Renew batteries (AAA Batteries or
insert for first use).
Ensure seal cover and batteries are
correctly positioned.
Remote Control
Remote Control
Holder
AAA
Batteries
Remote
AAA
Batteries
Seal
Cover
Remote Control Holder
Install Tape on Backside of
Remote Control Holder
Stick Remote Control Holder
onto the Wall
Wall
Double Sided
Tape
To Next Page
Loading...