Watchguard AP322 - Page 7

Hardware Guide 5
Hardware Specifications
AP Firmware 8.8.0 and Lower
Device Indicators in AP Mode
Device Indicators in WIPS Mode
These indicators are active when the AP is set to dedicated WIPS (Wireless Intrusion Prevention System) mode.
For more information about WIPS mode, see the WatchGuard Wi-Fi Cloud help.
Power LAN1 LAN2 2.4 GHz 5 GHz Description
Solid green Solid green On/Off Any Any Powered on and operating
correctly. Connected to
WatchGuard Wi-Fi Cloud services.
Solid green Slow flash
green
On/Off Any Any Software upgrade in progress.
Solid amber Solid green On/Off Any Any No Ethernet link.
Solid amber Fast flash
green
On/Off Any Any Did not receive a valid IP address
from DHCP.
Solid amber Slow flash
green
On/Off Any Any Cannot connect to WatchGuard 
Wi-Fi Cloud services.
Off Off Off Off Off Not powered on or in startup
process.
Power LAN1 LAN2 2.4 GHz 5 GHz Description
Solid green Solid green On/Off Solid
green
Solid
green
Powered on and operating
correctly. Connected to
WatchGuard Wi-Fi cloud
services.
Solid green Slow flash
green
On/Off Slow flash
green
Any Software upgrade in process.
Solid amber Solid green On/Off Solid
green
Any No Ethernet link.
Solid amber Fast flash
green
On/Off Fast flash
green
Any Did not receive a valid IP
address from DHCP.
Solid amber Slow flash
green
On/Off Slow flash
green
Any C annot connect to
WatchGuard Wi-Fi Cloud
services.
Off Off Off Off Off Not powered on or in startup
process.
Solid green Solid green On/Off Solid
Green
Solid
green
Sensor is troubleshooting on
802.11b/g/n
Solid green Solid green On/Off Solid
Green
Fast flash
green
Sensor is troubleshooting on
802.11a/n/ac
Solid green Solid green On/Off Solid
Green
Fast flash
green
Sensor is troubleshooting on
both 802.11b/g/n and 802.11a/
n/ac
Solid green Solid green On/Off Solid
Green
Solid
green
Sensor is performing intrusion
prevention on 802.11b/g/n