EasyManua.ls Logo

Watchguard AP325 User Manual

Watchguard AP325
25 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WatchGuard® Technologies, Inc.
WatchGuard
®
AP
AP325
HW Model: C-110
Quick Start Guide

Other manuals for Watchguard AP325

Question and Answer IconNeed help?

Do you have a question about the Watchguard AP325 and is the answer not in the manual?

Watchguard AP325 Specifications

General IconGeneral
InternalNo
PlacementCeiling, Floor, Table, Wall
Reset buttonYes
CertificationFCC, IC, CE, MIC, NRTL/C, CB, CE, WEEE, RoHS
Product colorWhite
LED indicatorsLAN, Power
Cable lock slot typeKensington
MIMO typeMulti User MIMO
ModulationDSSS, OFDM
Frequency band2.4 - 2.4835 GHz, 4.9 - 5.0GHz, 5.15 - 5.25 GHz, 5.25 - 5.35 GHz, 5.47 - 5.6 GHz, 5.650 - 5.725 GHz, 5.725 - 5.85 GHz GHz
Transmitting power20 dBmW
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Maximum data transfer rate (5 GHz)867 Mbit/s
Flash memory64 MB
Internal memory256 MB
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms-
Number of SSID supported8
Antenna featuresIntegrated antenna
Antennas quantity6
Antenna gain level (max)3.5 dBi
Input current1.5 A
AC input voltage12 V
Power consumption (max)19 W
Power consumption (typical)16 W
Package depth254 mm
Package width241.3 mm
Package height76.2 mm
Package weight1360 g
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Width196 mm
Height43 mm
Weight850 g

Summary

Activate Your AP

Select Your AP Management Method

Set Up an AP with Wi-Fi Cloud

Connect to the WatchGuard Wi-Fi Cloud

Log in to the WatchGuard Support Center or the Wi-Fi Cloud portal to manage your AP.

Configure your AP

Add a wireless network, set SSID, and select security mode within the Wi-Fi Cloud.

Set Up an AP with a Firebox

Connect the AP

Connect the AP to a Firebox interface with DHCP enabled for management.

Verify AP Status

Check the AP status in the Access Points tab of the Gateway Wireless Controller dashboard.

FCC Certification

Industry Canada Certification

Related product manuals