Water Control BrassMaster User Manual

Installation / Operation
Manual
Filter for removal of
Arsenic III, Arsenic V,
Iron+Manganese+Hydrogen Sulfide
BrassMaster and BrassMaster Plus Technical Video Library:
https://watercontrolinc.com/residential-technical-support/residential-technical-videos
BrassMaster technical videos demonstrate how to set up or remove the control module. If replacing your
control module, please use the (downloadable) Module Order Form.
IMPORTANT: Test your water quarterly to ensure proper system operation!
Five postage pre-paid test bottles included!
To reorder, visit watercontrolinc.com/element33-arsenic-removal or scan this QR code:

Water Control BrassMaster Specifications

General

Brand	Water Control
Model	BrassMaster
Category	Water Filtration Systems
Language	English

Summary

Warning! Health Risks

Health Risks of Contaminated Water

Details health risks associated with consuming water with high arsenic levels, including cancer and developmental delays.

System Capabilities and Performance

Capabilities, Media Life, and Regeneration

Outlines system capabilities, typical media life, regeneration frequency, and maximum contaminant levels for raw water.

Regeneration Water Usage

Specifies water usage for regeneration based on model EL33-150 and EL33-250.

System Test Challenges

Presents test results showing water quality before and after filtration for key contaminants.

Installation Procedure

Identify Installation Location

Specifies where to install the ELEMENT33, emphasizing no upstream filters and compliance with local regulations.

Connect Water Piping

Details connecting the unit to water service lines using a bypass device, cautioning against overheating.

Connect Drain Line

Explains attaching the drain line, ensuring a minimum 1 1/2" air gap to prevent backflow.

Connect to Electrical Power

Instructs connecting the power cord to a 120VAC, 15Amp GFI outlet.

Start-Up Procedure

Placing Unit Into Service

Guides on filling the mineral tank with water, using the bypass valve, and initiating the backwash cycle.

Setting Current Time/Day

Explains how to adjust the current time and day display on the unit.

User Programming Mode

Details how to enter programming mode and set parameters like Day Override and Regeneration Time.

Maintenance and Warranty Information

Assured Performance Modular (APM) Design

Highlights the APM design allowing easy removal and replacement of valve components.

Technical Video Library and Support

Provides links to technical videos and contact information for module support.

Official Warranty

Limited Warranty Terms

Covers 5-year warranty for control valve, mineral tank, and brine tank, excluding labor costs.

Disclaimer of Implied Warranties

States that express warranties are in lieu of all other express or implied warranties.

Exclusions from Warranty Coverage

Lists conditions not covered, such as improper installation, misuse, and failure to test water.