®
STEP 3a: Remove the lanyard by
cutting it. Dispose of the lanyard
and knob as they are no longer
needed.
Installation Guide - NiMH to Lithium
Need Help? Contact Customer Care at (732) 967-9888
Upgrading the Pool Blaster® MAX Li/MAX Li CG Motor Box
3
STEP 4: Place the funnel / motor box / pole attachment (currently one
piece) funnel side up, with the pole facing you and extending below the
edge of the table.
STEP 3: Turn the unit over and remove the three (3)
screws holding the opposite shell in place. Separate
shell from unit and place screws to side.
To Next Page
