ITEM No. DESCRIPTION PART No. QTY.
1 Vacuum Head PROA006 1
2 Vacuum Head Brushes PROW049 6
3 Vacuum Head Wheels PROW050 11
4 Nose Cap PROA002 1
5 All Purpose Filter Bag/Seal Ring PROW022AP 1
6 Pool Blaster PRO PROA005 1
7 Battery Charger PROA099* 1
8 Spring Clip PROW041 1
9 Battery Pack PROA007 1
10 Motor Box Cap PROA015 1
11 Sand and Silt Bag (not shown) PROW022SS 1
12 Multi Layer Micro lter Bag (not shown) PROWO22MF 1
13 Sholder Strap (not shown) PROW070 1
Product Speci cations
VACUUM UNIT BATTERY
Motor 12 Volt, DC Charger Rating 120V, 60 Hz AC only (US)
240 volts. 50Hz AC only (International)
Charger Voltage 16.8 V
ADDITIONAL PARTS AVAILABLE:
Shallow Water Hose Attachment (part No. PROASHA)
* U.S. Charger (part No. PROA099)
* European 230V Charger (part No. PROA099EU)
To purchase, contact your retailer or call us at (800)298-8800
WARNING:
The Battery Charger is for indoor use only.
WARNING:
Do not expose charger to excessive moisture or extreme heat or cold. Charge battery only with the battery charger provided.
CHARGING BATTERIES
BATTERY LIFE
•
Your battery pack should give you many hours of use. If your motor, batteries, or charger stop working, take the cleaner to an authorized service center.
• NEVER leave your battery plugged in for long term storage.
• The Battery Pack should be charged at least once a month when not in regular use.
4
5
6
7
8
9
1. Remove the battery pack from the rear of the cleaner.
2. Attach the Battery to the Battery Charger.
3. Plug the Battery Charger to any standard 115V/60Hz electrical
outlet.
The battery pack for your cleaner has been shipped in
a low voltage condition. It should be charged for 12
Hours prior to initial use.
When the charge has been exhausted, recharge the
battery for 10 - 12 Hours.
10
1 2 3
To Next Page
Loading...
