Need help?Do you have a question about the Waterford Erin(e) and is the answer not in the manual?
General| Brand | Waterford |
|---|---|
| Model | Erin(e) |
| Category | Wood stove |
| Language | English |
Steps for preparing the stove before installation, including removing packing and components.
Specifies required distances from the stove to combustible materials.
Conditions under which clearances can be reduced using shields.
Requirements for protecting the floor under the stove.
Details on fitting the optional heat shield and pipe shield for reduced clearances.
Factors to consider when choosing a location for the stove.
Requirements for chimney size, type, height, draught, and connector.
General guidelines for burning wood and operating the stove safely.
Step-by-step instructions for starting a fire in the stove.
Guidance on adjusting primary air for different burn rates.
Safe procedures for removing and disposing of ashes.
Steps for removing excessive ash build-up from the firebox.
Explains creosote formation and inspection/cleaning of chimney.
Essential fire safety considerations for stove operation.
Step-by-step guide for replacing the stove's glass door.
How to clean the stove glass, both automatically and manually.
To Next Page
