What to do if WaterLink Spin Touch says 'Used Disk'?
If your WaterLink Test Equipment displays 'Used Disk', it means a reacted disk is in the chamber. Select 'Continue' to go to the Test Results screen, or select 'Abort' to go to the Testing screen and run the test with a new disk.
What to do if WaterLink Test Equipment says 'Meter Check Disk'?
If your WaterLink Test Equipment displays 'Meter Check Disk', it means a Meter Check Disk is in the chamber instead of a reagent disk. Select 'Continue' to go to the Test Results screen or select 'Abort' to go to the Testing screen and run the test with a reagent disk.
Why are results not printing from WaterLink Spin Touch Test Equipment?
If your WaterLink Test Equipment results are not printing, ensure the printer is turned on and connected to the Mobile Bluetooth Printer (Code 5-0066).
Steps to prepare the device before initial operation.
Instructions for charging the device's battery.
Process for updating the device's firmware.
Details on connecting the device to a PC.
How to connect the device to a PC using a USB cable.
How to connect the device to mobile devices via Bluetooth.
How the meter operates during a test cycle.
Explanation of the meter's touchscreen interface.
Step-by-step guide for performing a water test.
How to manage and transfer test results.
Methods for transmitting results via Bluetooth.
Information about the disk reagent system.
Proper procedures for handling reagent disks.
Instructions for using the disk cover.
Accessing and configuring device settings like brightness, date/time, language, calibration, power, Bluetooth, and market type.
General| Measurement Method | Photometric |
|---|---|
| Display | Color Touchscreen |
| Power Supply | Rechargeable Battery |
| Sample Type | Water |
| Test Time | 60 seconds |
| Accuracy | Varies by Parameter |
| Resolution | Varies by Parameter |
| Sample Volume | 10 ml |
| Connectivity | USB, Bluetooth |
| Parameters Measured | pH |
| Measurement Range | Varies by Parameter |
To Next Page