Need help?Do you have a question about the Waters 2487 Dual A and is the answer not in the manual?
General| Brand | Waters |
|---|---|
| Model | 2487 Dual A |
| Category | Security Sensors |
| Language | English |
Provides a general description of the Waters 2487 Dual Lambda Absorbance Detector and its capabilities.
Explains the fundamental optical and electronic design and operational principles of the detector.
Details the optical components and light path within the Waters 2487 Dual Lambda Absorbance Detector.
Describes the procedure for verifying wavelength accuracy using known transmission peaks.
Explains the features and benefits of the Waters TaperSlit Flow Cell design.
Details the electronic components controlling the detector's functions.
Outlines the different operating modes available for the 2487 Detector.
Describes how to operate the detector in single wavelength mode.
Explains the operation and features of the detector in dual wavelength mode.
Details how to perform spectrum scanning using the detector.
Explains how to use the cuvette option for spectral measurements.
Describes how to obtain a RatioPlot for analyzing absorbance ratios.
Explains how to obtain a MaxPlot for analyzing maximum absorbance values.
Provides an introduction to the installation process for the 2487 Detector.
Details the necessary site requirements and power specifications for installation.
Guides the user through unpacking and inspecting the detector components.
Provides instructions for making fluidic connections to the detector.
Details the procedure for connecting the detector to the AC power supply.
Explains how to make signal connections for operating the detector with external devices.
Describes connecting the detector to a 2690 module in a stand-alone setup.
Details IEEE-488 connections for system integration with Breeze and Millennium32.
Guides on connecting the detector to various HPLC system devices.
Explains connecting the detector to Millennium32 via the busSAT/IN module.
Details connecting the detector to a Waters 745/745B/746 Data Module.
Provides instructions for connecting the detector to a chart recorder.
Guides on connecting the detector to the Waters 600 Series Pump.
Explains how to connect the detector to the Waters 717plus Autosampler.
Details connecting the detector to a fraction collector.
Covers the initial startup procedures for the 2487 Detector.
Explains how to use the detector's operator interface, including display and keypad.
Details the various operational aspects of the detector, including modes and controls.
Provides procedures for verifying the proper operation of the detector.
Describes the manual wavelength calibration procedure for the detector.
Explains how to operate the detector in single wavelength mode.
Details the operation of the detector in dual wavelength mode.
Guides on programming timed events, threshold events, and methods.
Covers the procedures for scanning spectra using the detector.
Provides instructions for properly shutting down the detector.
Provides an introduction to maintenance procedures and safety precautions.
Outlines the routine maintenance tasks required for optimal performance.
Details procedures for inspecting, cleaning, and replacing flow cell components.
Provides instructions for removing and replacing the detector's deuterium lamp.
Guides on identifying and replacing the detector's fuses.
Lists and describes error messages and recommended corrective actions.
Explains how to use user-selectable diagnostics for troubleshooting.
Provides causes of errors and recommended troubleshooting actions.
Lists the operational specifications for the 2487 Detector.
Details the optical specifications of the detector's components.
Lists specifications for optional flow cells.
Lists user-replaceable spare parts for the 2487 Detector.
Details the limited express warranty provided by Waters Corporation.
Provides an introduction to solvent considerations for HPLC systems.
Discusses solvent miscibility and how to predict it.
Provides guidelines for using buffered solvents in HPLC systems.
Explains the importance and methods of mobile phase solvent degassing.
To Next Page
