- General Care and Cleaning -
1. Do not place heavy or sharp objects on water softener or cabinet.
2. Use only mild soap and warm water to clean exterior of the unit. Never use harsh, abrasive cleaners.
3. Protect the water softener and drain line from freezing.
4. Reset time for daylight saving time periods.
5. Replace 9-volt battery once a year.
6. Inspect and clean the brine tank when sediment appears in the bottom of the salt compartment.
7. Always keep the brine tank supplied with good quality salt, a type designed for use in water softeners.
Servicing Instructions
- Changing The Salt -
1. Unplug electrical cord from outlet.
2. Remove the control valve back cover.
3. Locate salt dosage cam.
4. Loosen salt dosage cam set screw.
5. Rotate salt dosage cam until pointer lines up with desired salt setting.
6. Tighten set screw.
7. Replace control valve back cover.
8. Plug electrical cord into outlet.
9. Rest time of day.
14
Installing the Control Valve
To Next Page
Loading...
