Watlow 945 Series - LOC; AL1; AL2

Setup, Chapter 4
17
WATLOW Series 945 User's Manual
Setup
Setup Menu
Use this page as a master copy for configuring your Series 945.
Do not enter any values here; make photocopies instead.
Table 2 -
Setup Menu Prompts
and Descriptions.
Parameter Value Range Factory Default Appears If:
LOC 0 - 3 0
In J, K (appears as H), t, n, c, Pt2, J or r
r, S, b, rtd, rt.d, 0-5, 420
rSP OFF, 0-5, 420 OFF In = T/C or RTD
dEC 0, 0.0, or 0.00 0 In = 0-5 or 420
C _ F C or F F In = T/C or RTD
rL rL to rH Input dependent.
rH rH to rL Input dependent.
Ot1 ht or CL ht
HYS1 1°F - 99°F, 1°C - 55°C, 1U - 99U 3°F
0.1°F - 9.9°F, 0.1°C - 5.5°C, 0.1U - 9.9U
Ot2 ht, CL or no CL Unit has secondary output
HYS2 1°F - 99°F, 1°C - 55°C, 1U - 99U 3°F Unit has secondary output
0.1°F - 9.9°F, 0.1°C - 5.5°C, 0.1U - 9.9U Ot2 = ht or CL
AL1 Pr, dE or no Pr Unit has alarms
LAt 1 LAt or nLA nLA Unit has alarms and
AL1 = Pr or dE
HYS3 1°F - 99°F, 1°C - 55°C, 1U - 99U 3°F Unit has alarms and
0.1°F - 9.9°F, 0.1°C - 5.5°C, 0.1U - 9.9U AL1 = Pr or dE
Ot4 no, PrOC, StPt PrOC Hardware is present
AL 2 Pr, dE or no Pr Unit has alarms
LAt 2 LAt or nLA nLA Unit has alarms and
AL2 = Pr or dE
HYS4 1°F - 99°F, 1°C - 55°C, 1U - 99U 3°F Unit has alarms and
0.1°F - 9.9°F, 0.1°C - 5.5°C, 0.1U - 9.9U AL2 = Pr or dE
SIL On or OFF OFF Unit has alarms & AL1 = dE
rtd JIS or din din In = rtd or rt.d