Watlow QPAC-01 - Page 10

Starting Out
10
QPAC User's Manual
Install and Wire, Chapter 2
0.63
(16mm)
0.44
(11mm
0.22
(6mm)
Drill & tap
hole "B"
for #10
fasteners
A
B
4.28
(109mm)
4.90
(124mm)
2.84
(72mm)
Fuse Template
Figure 8 -
Fuse Holder Kit
Mounting Template
for:
QPAC-01, 75 & 100A
(1 Fuse Kit)
QPAC-32, 75 & 100A
(2 Fuse Kits)
QPAC-33, 75 & 100A
(3 Fuse Kits)
Fuse Holder
(side view)
Use this page as a template for mounting your fuse holder kit. Choose the size
that matches your kit and carefully punch out the template along the perforation.
ç
CAUTION:
Spacing for multiple
fuses must conform
to the National
Electric Code (NEC)
and any other local
electrical codes.
A
B
Stud Size 5/16"