Starting Out
2
How to Use the Manual
QPAC User's Manual
This manual will make your job easier.
Reading it and applying the information is a
good way to become familiar with the QPAC. An overview:
Introduction, Chapter 1, Page 4.
Installation and Wiring, Chapter 2, Page 6.
Operation, Chapter 3, Page 25.
Troubleshooting, Page 28
Specifications
Warranty
Notes
A bold text "NOTE" marks a short message in the margin to alert you to an important
detail.
Safety Information
This user's manual also has boldface safety information notes to protect both you and
your equipment. Please be attentive to them. Here are explanations:
ç
The CAUTION symbol (exclamation point) in the wide text column alerts you to a
"CAUTION," a safety or functional hazard which could affect your
equipment
or its
performance. A full explanation is in the narrow column on the outside of the page.
∑
The WARNING symbol (lightning bolt) in the wide text column alerts you to a "WARN-
ING," a safety hazard which could affect you and the equipment. A full explanation is in
the narrow column on the outside of the page.
Your Feedback
We welcome comments or suggestions on this manual, please contact:
Technical Writer, Watlow Winona, 1241 Bundy Blvd, P.O. Box 5580, Winona, MN
55987-5580. Phone: 507-454-5300; Fax: 507-452-4507. The QPAC User's Manual is
copyrighted by Watlow Winona, Inc. © July 2003 with all rights reserved. (2392)
Technical Assistance
If you encounter a problem with your Watlow controller, review your configuration
information to verify that your selections are consistent with your application: inputs,
outputs, alarms, limits, etc. If the problem persists, you can get technical assistance
from your local Watlow representative (see back cover), by e-mailing your questions to
wintechsupport@watlow.com or by dialing +1 (507) 494-5656 between 7 a.m. and 5
p.m., Central Standard Time (CST). Ask for for an Applications Engineer. Please have
the following information available when calling:
• Complete model number • All configuration information
• User’s Manual • Serial Number
The model, part number, and serial numbers can be found on the label on the outside of
the case.
Use The Manual
Starting Out
Install/Wire
Operation
First…
Appendix
How to Use the Manual
ç
CAUTION:
Details of a "Caution"
appear here, in the
narrow box on the
outside of each page.
∑
WARNING:
Details of a "Warning"
appear here, in the
narrow box on the
outside of each page.
NOTE:
Details of a "Note"
appear here, in the
narrow box on the
outside of each page.
To Next Page
Loading...