31
QPAC User's Manual
Appendix
Q
Model No.
Model Number Information — (1294)
To order, complete the code number
to the right with the information below:
QPAC = Modular power controller; phase angle, burst,
or solid state contactor with fuse(s) and holder(s) included.
Phase
01 = Single phase
32 = 3-phase, 2 leg (optional 3rd leg fuse kit extra.)
33 = 3-phase, 3 leg
Operating and Output Voltage
12 = 120V~(ac)
20 = 208V~(ac)
24 = 240V~(ac)
27 = 277V~(ac)
38 = 380V~(ac)
41 = 415V~(ac)
48 = 480V~(ac)
57 = 575V
1
~(ac)
Cooling Fan Voltage
3
Customer to supply wiring and hook-up.
0=No fan; all 1-phase 30 and 50 amp models only
1=120V~(ac); required on all 3-phase models
2=240V~(ac); required on all 3-phase models
Output Current (Amps)
030 = 30 amps
050 = 50 amps
075 = 75 amps
100 = 100 amps
150 = 150 amps
200 = 200 amps
300 = 300 amps
400 = 400 amps
500 = 500 amps
600 = 600 amps
800 = 800 amps
01K = 1000 amps
Input Control Card
CA = Solid state Å(ac) input (08-5285) contactor
CD = Solid state Î(dc) input (08-5286) contactor
BF = Burst fired, fixed time base (08-5289) 4-20mA
BV = Burst fired, variable time base (08-5342) 4-20mA
AF = Phase angle fired, not available on Q32 (08-5288) 4-20mA
AL = Phase angle fired w/current limit, not available on Q32 (08-5411); 4-20mA
includes one current transformer. Add second CT for 3-phase, 3 leg.
AL models 75 amps and above require one interstage transformer.
Open Heater/Shorted SCR Detector
4,5
0=None
1=Single phase operation
2=Three phase operation
To Next Page
Loading...