WATSON TONIC - Attach Worksurface; Prepare Monitor

5 Tonic Simple Media Table Assembly | INS-TWTM
Attach Worksurface
A
Once the worksurface is in position,
attach it to the screen with ⁄-20x⁄”
Button Head Screws (x7).
B
Units with an overall width of 72”
or wider will include outer support
brackets and additional
⁄-20x⁄” screws (x4).
Prepare Monitor
A
Place the monitor face down on a
clean blanket or on carpet.
B
Attach the interface brackets
using whichever screws your monitor
requires.
Note — Monitor not included.
(490719)
5.
6.
A
B
A
B