EasyManuals Logo

WattBox WB-800-IPVM-12 User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Page 10
LED INDICATORS
e bank of six LED indicator lights give you key information about the health of your system.
Internet Green (solid) All sites/IP addresses are communicating with the WattBox.
Green (ashing) At least one (not all) sites/IP addresses are communicating with the WattBox.
Red None of the sites/IP addresses are communicating with the WattBox.
System
Status
Green (solid) WattBox processor is in an operating state and can be accessed via the WattBox interface.
Red (ashing) Firmware for the WattBox processor is being updated. During this state, the WattBox cannot be
accessed via the WattBox interface.
Auto
Reboot
Green Auto reboot is enabled. WattBox will power cycle outlets that are on when communication with
the assigned website/IP address is lost. Outlets that are o will not power cycle.
O Auto reboot is disabled. No power cycle will occur when communication with the assigned
website/IP address is lost.
Safe
Voltage
Green Safe Voltage is enabled. e current incoming AC voltage is safe for operation.
Red Incoming AC voltage is NOT safe. Outlets have been turned o to protect the equipment.
O Safe Voltage is disabled.
Surge
Protected
Green e WattBox is powered on and outlets are protected.
O e WattBox is not powered on, or the MOVs have opened, removing power from the outlets.
Grounded Green Incoming AC outlet is grounded.
O Incoming AC outlet is NOT grounded and requires inspection by an electrician.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WattBox WB-800-IPVM-12 and is the answer not in the manual?

WattBox WB-800-IPVM-12 Specifications

General IconGeneral
BrandWattBox
ModelWB-800-IPVM-12
CategoryAC Power Distribution
LanguageEnglish

Related product manuals