WattBox 800 Series - User Manual

20 pages

Save Page as PDF

To Next Page

™

WB-800-IPVM-12

QUICK START GUIDE

CONTROLLED 1 CONTROLLED 2 CONTROLLED 3 CONTROLLED 4 CONTROLLED 5 CONTROLLED 6

NETWORK

RESET

120VAC 60Hz

POWER

SAFE

VOLTAGE

ACCUPS LINK

OFF

WB-800-IPVM-12

CONTROLLED 7

FILTERED

CONTROLLED 8 CONTROLLED 9 CONTROLLED 10 CONTROLLED 11 CONTROLLED 12

Main Page

Questions and Answers

T
Tracy SmithJul 28, 2025
What to do if my WattBox 800 AC Power Distribution is not receiving power?
- C
  christycookJul 28, 2025
  First, ensure the AC power plug is properly connected to a grounded 120V wall outlet. Check if the outlet is controlled by a wall switch and try toggling the switches, especially those near the outlet. Also, verify the location’s circuit breakers. If the WattBox is overloaded, press the circuit breaker's reset button. Wait 10 minutes before resetting. If it continues to trip, move some components to another WattBox.
D
Dalton BeckAug 11, 2025
How to stop speakers humming or buzzing noise from WattBox 800?
- C
  Christopher FreemanAug 11, 2025
  The humming or buzzing noise could be due to the WattBox sharing AC power with equipment that isn't properly grounded. Try connecting the WattBox to a dedicated outlet. Alternatively, unplug components from the WattBox one at a time to see if the noise stops.

Summary

Quick Start Guide

Front Panel Overview

Front Panel Components

Detailed description of the front panel's outlets, indicators, buttons, and ports.

Rear Panel Overview

Rear Panel Components

Description of the rear panel's accessory outlet and other features.

Package Contents

Product Features

Rack Mounting Options

Small Bracket Mounting

Instructions for mounting the unit using small brackets.

Large Bracket Mounting

Instructions for mounting the unit using large brackets.

Wall Mounting Options

Connections and Setup

OvrC Connectivity

Finishing Setup with OvrC

Steps to complete the WB-800 setup and configuration using the OvrC platform.

Logging into the Web Interface

Instructions for accessing the WattBox's web interface with default credentials.

LED Indicators

Troubleshooting

Important Safety Instructions

Safety Notices and Warnings

General safety precautions, potential injury risks, and lithium battery handling.

Power, Liquid, Cord, and Parts Warnings

Critical warnings regarding electrical safety, liquid exposure, cord management, and internal parts.

Heat, Cleaning, and FCC Compliance

Guidance on heat exposure, cleaning, and FCC compliance requirements.

Warranty Information

Warranty Terms and Policies

Details on limited product warranty, replacement policy, and internet purchaser limitations.

Connected Equipment Protection Policy

Policy details for protecting connected equipment from surges.

Policy Requirements and Notification

Conditions for claims, proof of purchase, proper installation, and notification procedures.

California Proposition 65 Warning

WattBox 800 Series Specifications

General

Surge Protection	Yes
Remote Management	Yes
Outlets	8
Rack Mountable	Yes
Voltage	120V
Amperage	15A
IP Control	Yes
Maximum Current per Outlet	15A
Power Sequencing	Yes
Series	800
Input Frequency	50/60Hz
Network Control	Ethernet