Use (◄) & (►) keys to change the mode in the Operating mode menu. For
all operating modes the receiver switch should be placed on AUTO position.
Set CLOCK Menu :
Use this menu to adjust the clock.
Use (+) & (-) to adjust the minutes.
Then press (Ok) key
Use (+) & (-) to adjust the hours.
Then press (Ok) key
Use (◄) & (►) to adjust the day.
Then press (Ok) key
COMFORT operating mode:
By pressing (+) or (-) keys the comfort temperature starts to blink and can be
adjusted.
The room temperature
reappears after a few seconds.
The MILUX RF regulation will now follow indefinitely the comfort
temperature.
AUTOMATIC operating mode:
MILUX RF will follow automatically the program according to the actual time.
By pressing (+) or (-) key you can override the current set temperature until
the next change in the program.
The segment will lit up. Use (+) or (-) keys to adjust the temporary
required temperature.
At the next program change the will disappear and the program
continues without any alteration.
REDUCED operating mode:
By pressing (+) or (-) keys the comfort temperature starts to blink and can be
adjusted.
The room temperature
reappears after a few seconds
The MILUX RF regulation will now follow indefinitely the reduced
temperature.
ANTI FREEZE operating mode :
Prevent your installation from freezing.
By pressing (+) or (-) keys the anti freeze temperature starts to blink and can
be adjusted.
The room temperature
reappears after a few seconds
Now the MILUX RF will keep the temperature above freezing.
To Next Page
Loading...
Need help?
General
