Watts tekmar 294 - Boiler Status Screens; Boiler Status List Screen; Boiler Status Carousel Screen; Boiler Hours or Cycles Screen

18
IOM-T-294 2205 © 2022 tekmar
• Press
…
ellipsis to go to the Boiler Status Carousel screen
• The circle in blue indicates the boiler firing rate percent or
boiler target temperature
• Press the boiler hour number to go to the Boiler Hours
screen
• Press the boiler cycle number to go to the Boiler Cycles
screen
• When the boiler pump is running or the boiler isolation
valve is open, the dot is green
• When the boiler pump is off or the boiler isolation valve
is closed, the dot is gray
•
Press  to go to the Boiler Status List Screen
• Swipe left to view higher number boilers
• Swipe right to view lower number boilers
• The circle in blue indicates the boiler firing rate percent
or boiler target temperature
• Press the boiler hour number to go to the Boiler Hours
screen
• Press the boiler cycle number to go to the Boiler Cycles
screen
• When the boiler pump is running or the boiler isolation
valve is open, the dot is green
• When the boiler pump is off or the boiler isolation valve
is closed, the dot is gray
• Press CLEAR to zero the boiler hours or the boiler cycle
count
• Pressing CLEAR also saves the zero hours or cycles
• Zeroing the hours places the boiler to the end of the
boiler equal run time rotation sequence
Boiler Status List Screen
Boiler Status Carousel Screen
Boiler Hours or Cycles Screen