Why is my Wave 17660 pump not heating properly?
Your Wave Hot Tub pump may not be heating properly because the temperature setting is too low. Set it to a higher temperature. Low water level can also cause this issue. If the heating element is defective, call for service.
What to do if Wave 17660 Hot Tub water is not clean?
If the water in your Wave Hot Tub is not clean, you can clean or replace the cartridge. You might also need to change the pool water completely. Ensure proper water treatment and refer to the chemical manufacturer’s instructions.
What to do if Wave Hot Tub bubble massage system does not work?
If the bubble massage system in your Wave Hot Tub isn't working, the pump might be overheating. Cut off the power and wait until the pump has cooled. You can also press the bubble button to reactivate it. If it does not reset, call for service.
How to fix Wave Hot Tub pump leakage?
If your Wave Hot Tub pump is leaking, the adaptor seal might be improperly positioned. Replace the seal in the right position. If the water leakage is from the pump body, check the pump body and call for service.
What to do if Wave Hot Tub control panel screen does not operate?
If the control panel screen of your Wave Hot Tub does not operate, check the power source. It might be a power failure. If it does not reset, call for service.
Critical safety risks such as drowning and electric shock are detailed here.
Important safety precautions including electrical zone requirements and child safety.
Technical details of the spa model, including dimensions, capacity, and power.
A list of all components included in the spa package for user verification.
Guidelines for choosing an appropriate and safe location for spa installation.
Instructions for performing a safety test on the Residual Current Device.
Step-by-step instructions for inflating and assembling the spa structure.
An overview of the spa's control panel, its buttons, and display functions.
Explanation of how to operate the spa's features like filtration, heating, and massage.
Key recommendations for maintaining proper pool water balance and sanitation.
Procedures for cleaning and replacing the spa's filter cartridge to ensure water quality.
Instructions on how to properly drain the spa and prepare it for storage.
A guide to diagnosing and resolving common problems encountered with the spa.
Guidance on using the provided repair kit to fix small punctures or leaks.
A reference table explaining error codes displayed on the control panel and their meanings.
Detailed information regarding the product's warranty terms, coverage, and registration.
To Next Page
General
