What to do if Wave ATLANTIC PLUS pump does not heat properly?
If your Wave Hot Tub pump isn't heating the water properly, there are a few things to check. First, make sure the temperature is set high enough. If it is, the filter cartridge might be dirty, so try cleaning or replacing it. Also, ensure the water level is at least at the minimum. If none of these steps work, the heating element may be defective.
What to do if my Wave ATLANTIC PLUS Hot Tub pump does not heat properly?
If your Wave Hot Tub pump isn't heating properly, make sure the temperature isn't set too low by setting it to a higher temperature. Also, check if the filter cartridge is dirty and clean or replace it. Ensure the water level is at least at the minimum required level. If none of these steps work, the heating element may be defective.
Why is the water in my Wave Hot Tub not clean?
The water in your Wave Hot Tub might not be clean due to several reasons. You may not be filtering for long enough and need to change the filters weekly. The filter cartridge might be dirty, requiring cleaning or replacement. The water quality itself could be poor, necessitating a complete water change. Also, you might not be treating the water properly.
Why water filtration does not work in Wave Hot Tub?
If the water filtration in your Wave Hot Tub isn't working, start by checking the filter cartridge; it probably needs cleaning or replacing. Also, inspect the inlet and outlet for any blockages and clean them if necessary. Insufficient water level may cause air to get inside the pump, so ensure the water is filled to the minimum level.
How to fix Wave ATLANTIC PLUS Hot Tub bubble system that does not work?
If the bubble system in your Wave Hot Tub isn't working, the pump may be overheating; cut off the power and wait for it to cool down. Also, the auto shut-down feature might be activated (after 30 minutes); press the bubble button to reactivate it.
How to fix Wave ATLANTIC PLUS Hot Tub control panel screen that does not operate?
If the control panel screen on your Wave Hot Tub isn't working, first check the power source to ensure there isn't a power failure. Reset the RCD plug and check if the wiring system is adapted to the power of the pump unit (1540W).
What to do if Wave Hot Tub pump leakage?
If your Wave Hot Tub pump is leaking, check the adaptor seal to ensure it's in the correct position; if not, replace it. If water is leaking from the pump body, check the pump body.
What to do if Wave Hot Tub leakage?
If your Wave Hot Tub is leaking, inspect the spa for tears or punctures. If you find any, use the provided repair kit.
Why is the water not clean in my Wave ATLANTIC PLUS Hot Tub?
The water in your Wave Hot Tub might not be clean due to several reasons. You may need to increase the filtering time, or the filter cartridge may be dirty and needs cleaning or replacing. Consider that the pool filled water quality may be poor, requiring a complete water change.
What to do if the Wave Hot Tub water filtration does not work?
If the water filtration in your Wave Hot Tub isn't working, start by checking the filter cartridge; it may need cleaning or replacing. Ensure that the inlet and outlet are not blocked, and also verify that there is enough water in the tub.
Ensure to check all parts are present.
Details model, capacity, dimensions, power supply, and heating specifications.
Requirements for selecting a safe and suitable installation location for the spa.
Step-by-step guide on how to set up and inflate the spa unit.
Overview of the spa's control panel buttons and functions.
Explanation of how to use the temperature settings, lock function, and bubble system.
Guidelines for maintaining spa water quality, balance, and sanitation.
Instructions for cleaning and replacing the spa's filter cartridge.
Procedures for draining the spa and preparing it for storage.
Instructions on how to use the included repair kit for small punctures.
Common problems, their causes, and solutions for diagnosing spa issues.
Explanation of error codes displayed on the control panel and their remedies.
Details on warranty coverage, claim procedures, and contact information.
To Next Page
General
