How to fix a leaking Wave ATLANTIC PLUS pump?
If your Wave Hot Tub pump is leaking, check the adaptor seal and replace it in the correct position if it's improperly installed. In case of water leakage from the pump body you should check the pump body.
What to do if the bubble massage system doesn't work on my Wave ATLANTIC PLUS?
If the bubble massage system isn't working on your Wave Hot Tub, the pump may be overheating. Cut off the power and wait for it to cool down. Also, the auto shut-down feature might be activated; press the bubble button to reactivate it.
What to do if my Wave ATLANTIC PLUS Hot Tub control panel screen does not operate?
If the control panel screen on your Wave Hot Tub isn't working, verify the power source to ensure there isn't a power failure. Reset the RCD plug and check if the wiring system is adapted to the power of the pump unit.
How to repair a Wave Hot Tub pool leakage?
If your Wave Hot Tub pool is leaking, inspect it for tears or punctures. If you find any, use the provided repair kit to fix them.
Ensure to check all parts are present.
Details model, capacity, dimensions, power supply, and heating specifications.
Requirements for selecting a safe and suitable installation location for the spa.
Step-by-step guide on how to set up and inflate the spa unit.
Overview of the spa's control panel buttons and functions.
Explanation of how to use the temperature settings, lock function, and bubble system.
Guidelines for maintaining spa water quality, balance, and sanitation.
Instructions for cleaning and replacing the spa's filter cartridge.
Procedures for draining the spa and preparing it for storage.
Instructions on how to use the included repair kit for small punctures.
Common problems, their causes, and solutions for diagnosing spa issues.
Explanation of error codes displayed on the control panel and their remedies.
Details on warranty coverage, claim procedures, and contact information.
To Next Page
General
