What to do if Wave ATLANTIC pump does not heat properly?
If your Wave Hot Tub pump isn't heating the water properly, there are a few things to check. First, make sure the temperature is set high enough. If it is, the filter cartridge might be dirty, so try cleaning or replacing it. Also, ensure the water level is at least at the minimum. If none of these steps work, the heating element may be defective.
Why is the water in my Wave ATLANTIC not clean?
The water in your Wave Hot Tub might not be clean due to several reasons. You may not be filtering for long enough and need to change the filters weekly. The filter cartridge might be dirty, requiring cleaning or replacement. The water quality itself could be poor, necessitating a complete water change. Also, you might not be treating the water properly.
Why water filtration does not work in Wave ATLANTIC?
If the water filtration in your Wave Hot Tub isn't working, start by checking the filter cartridge; it probably needs cleaning or replacing. Also, inspect the inlet and outlet for any blockages and clean them if necessary. Insufficient water level may cause air to get inside the pump, so ensure the water is filled to the minimum level.
How to fix Wave ATLANTIC Hot Tub bubble system that does not work?
If the bubble system in your Wave Hot Tub isn't working, the pump may be overheating; cut off the power and wait for it to cool down. Also, the auto shut-down feature might be activated (after 30 minutes); press the bubble button to reactivate it.
How to fix Wave ATLANTIC control panel screen that does not operate?
If the control panel screen on your Wave Hot Tub isn't working, first check the power source to ensure there isn't a power failure. Reset the RCD plug and check if the wiring system is adapted to the power of the pump unit (1540W).
What to do if Wave Hot Tub pump leakage?
If your Wave Hot Tub pump is leaking, check the adaptor seal to ensure it's in the correct position; if not, replace it. If water is leaking from the pump body, check the pump body.
What to do if Wave Hot Tub leakage?
If your Wave Hot Tub is leaking, inspect the spa for tears or punctures. If you find any, use the provided repair kit.
Why is the heating system not working on my Wave Indoor Fireplace?
Several factors can cause the heating system to malfunction. The temperature might be set too low; try increasing it to between 20-42°C. A dirty filter cartridge can also cause this issue, so clean or replace it. Ensure the water level is correct by adding water to the specified levels. If none of these steps work, the heating element may have failed, and you will need to call for service.
What to do if the filtering system of my Wave Indoor Fireplace isn't working?
If the filtering system isn't operating, start by cleaning or replacing the filter cartridge. If that doesn't resolve the issue, there might be a problem with the power box, and you should call for service if it doesn't reset. Also, have an electrician check if the household input voltage or frequency is normal, as low or incorrect voltage can cause this problem.
How to clean the water in my Wave Indoor Fireplace?
If the water isn't clean, try increasing the filtration time. Also, clean or replace the filter cartridge. For proper water maintenance, refer to the chemical manufacturer’s instructions.
Key dangers and risks associated with spa use, including drowning and electric shock.
General precautions for safe spa operation, including electrical safety.
Details the items included in the spa package for verification.
Technical specifications for different spa models, including dimensions and capacity.
Guidance on selecting a suitable site and preparing the installation area.
Step-by-step instructions for assembling the inflatable spa and pump unit.
Explanation of the control panel buttons, display, and functions.
Details on operating functions like temperature control, bubbles, and locking.
Guidelines for maintaining water quality, balance, and sanitation.
Instructions for cleaning, replacing, and disinfecting the spa filter cartridge.
Recommendations for sanitizing spa water using specific treatment products.
Procedures for draining the spa and preparing it for storage.
Instructions on how to use the included repair kit for patching leaks.
A guide to diagnosing and resolving common issues encountered with the spa.
Explanation of error codes displayed on the control panel and their solutions.
Details on warranty coverage, terms, and how to submit a claim.
To Next Page
General
