Wavecom W74PC User Manual

6

General Information WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0
Version
Date
Changes
CRC added
- MIL-141A, CODAN-9001: Improved performance for Golay (24, 12) decod-
er
- MIL-39T: Display formats “ASCII” and “ITA-5” merged
- CIS-36-50, CIS-50-50: More fault-tolerant start and stop criteria, automat-
ic default to Letter Shift after idle or a longer sequence of invalid data, syn-
chronization to valid 3:4 characters without need for preamble
- DTMF: Character set changed (“*” and “#” replaces “E” and “F”)
- COQUELET-8, -13, -80: Bar graph range corrected
- STANAG, MIL modes: ITA-2 “U” character now printed
- FMS-BOS settings added to documentation
7.0.00
24-Nov-2010
New protocols:
- dPMR
- X.25
- TETRA
Improvements and modifications
- GUI, toolbars, menus etc. changed
- Wideband classifier (bandwidth 96 kHz)
- Adjustable “Classifier Code Check” with XML table lookup
- Classifier Code Check Table Editor
- CODAN-9001 extended with “Compressed Data” and “Secure Interactive
Packets” decoding. CODAN-9001 documentation extended
- SR Calibration added
- “SAT Translation Frequency Tuning Bar” changed to “SAT Frequency Tuning
Bar” and new functions added
- PSK-mode tuning window cursors are now merged into one, single cursor
- Application notes removed from the user manual into separate documents
(available from www.wavecom.ch)
- BR-6028 is now a mode and no longer a demodulator
- CRC tables are changed from “\Config\CRCTABLE.TXT” to
“\Config\CRCTable.xml”
- Source code chapter removed (as the source is no longer available)
- INMARSAT-A and METOSAT removed
- Notation of “Translation frequency” changed to “Offset frequency”
- Notation of “INDIR” changed to “SUB”
- VDL-M2, “Display-Mode” added
- AMSAT-P3D: The file “amsatp3d.raw” is no longer available
- Translation frequency replaced with offset frequency
- CW AFC: ON/OFF
- Automatic detection of the “Display Mode” for MIL-STD and STANAG signals
7.1.00
13-Apri-2011
- New WAVECOM install tool.
- License Key no longer required for W61PC Professional version (but still
requiered for the SAT and Classifier options).
- W-CODE no longer supports MEDAV PACTOR-3, CLOVER-2000, CLOVER-2
and CODAN-9001.
- APCO25 added.
- W-CODE: Name of SAT-Option and Classifier-Option changed.

Wavecom W74PC Specifications

General

Brand	Wavecom
Model	W74PC
Category	Media Converter
Language	English