Wavecom W74PC - Page 17

WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0 General Information

7
Version
Date
Changes
7.2.00
27-Jul-2011
- GW-OFDM protocol added.
- LINK-11 protocol added.
- SAT protocols, CLOVER2/2000, CODAN9001, PACTOR-III require no longer
an additional optional license. All functions are now contained in the W-
CODE or W61PC license.
- Better support of russian Windows (custom inputs).
- Wideband-Classifier works with VHF/UHF SUB Signals.
- Wideband-Classifier works with VHF/UHF DIR Signals.
- PxGF float support.
- FSK Code Check SUB uses always the FM demodulator.
- Classifier Code Check (CCC) VHF/UHF Direct added.
- Classifier Code Check (CCC) VHF/UHF Sub added.
- W-CODE: “Modem and Fax input file settings” removed. Direct support for
two analog input channels (stereo) added.
- W-Sat-email-Decoder requres a dedicated license.
7.3.00
12-Sept-2011
- VHF/UHF Classifier Codecheck DIR and SUB merged into one.
7.4.00
11-Nov-2011
- Incorporate W-PCI and W-PCIe hardware into W-CODE.
8.0.00
06-Dec-2011
- Enable voice classification in VHF/UHF Classifier Codecheck.
- Official launch of W-PCI and W-PCIe.
8.1.00
23-Apr-2012
- New mode: NXDN (demodulated symbol).
- Add a switch “output-demod-symbol” with “on” and “off” to output the bit-
stream directly after the demodulator. This parameter also added into XML
interface.
- STANAG-4285 has a demodulated symbol output for further analyze in W-
BitView Tool.
- STANAG-4285 center frequency search extended to +/- 160 Hz and various
improvements.
- Rename “IAS Bitstream Output” to “Demodulated Bitstream Output”.
- Rename “translation” to “offset” in XML interface.
- Add “display-mode” to Pactor in XML interface.
- Various improvements and bug-fixes.
8.2.00
01-Jan-2013
- New modes: CHINESE 4+4.
- New option W-CLOUD: Signal monitoring and decoding based on genuine,
encrypted IQ signal over large geographical distance.
- Classifier narrowband (CL-NB) extended to BW 48 kHz for VHF/UHF and
SAT bands.
8.3.00
01-Jun-2013
- W-CLOUD supports streaming IQ signal over VSC (Virtual Sound Card) of
WiNRADiO.
- GW-OFDM mode totally revised and improved.
- NXDN live voice output.
- New FFT and Sonagram display settings with “Base level”, “Range” and
“FFT length”.
- XML interface extension regarding W-CLOUD devices.
- Correction in ORBCOMM decoding position and speed data.
8.4.00
15-Nov-2013
- Wavecom Virtual Audio Cable (W-VAC) introduced into Media Player / Re-
corder, to record signal from a Wavecom hardware input device (W-PCI, W-
PCIe and W-CLOUD).