Wavefactory TrackSpacer - Overview of the TrackSpacer GUI

TrackSpacer User Manual, Revision A
10
Overview of the TrackSpacer GUI
TrackSpacer is a powerful tool that is surprisingly simple to use. There are only four controls and an EQ
display that shows the control signal and the EQ amount of the affected signal.
Note: the screenshot below was taken from TrackSpacer used in Reaper DAW, with the control and
affected signals as channel 1 and channel 2.
Channel 1 Send
Channel 2 Receive
Freeze Button
EQ Ratio
Low Pass
Frequency
High Pass
Frequency
EQ Display