Waves GTR - Bass Cabinets; Microphones

• 2 x 12” OpenBack Based on a Vox® AC-30 Celestion® Alnico Blue
• 4 x 10” OpenBack Based on a Fender® Super Reverb® Blackface 1968
with CTS alnico magnet speakers
• 12” OpenBack Based on a Mesa/Boogie® Mark IV with an Electro-
Voice® speaker
• 15” ClosedBack Based on a 1960’s Fender® Showman cabinet
• Acme 12” Custom Based on a custom cabinet by Ted Jensen of Sterling
Sound
• Acme 2 x 10” Cabinet Based on a 1962 Vox® cabinet
• Acme 8” OpenBack Based on a 1968 Gibson® Skylark
• Acme 4 x 12” Cab Based on a 1970’s Hiwatt® cabinet
• Acme 12” OpenBack Based on a mid ‘60s Ampeg Gemini cabinet
• Acme 2 x 10” OpenBack Based on a 1965 Fender® Vibrolux® Reverb
Blackface cabinet
• Acme Case Speaker Based on a late ‘60s Silvertone® case with built-in speaker
B
ASS CABINETS
• Bass 8 x 10” Pro Based on an Ampeg® SVT810AV
• Bass 6 x 10” Based on an Ampeg® SVT610HL
• Bass 15” Based on a late ‘60s Fender® Bassman®
• Bass 15” Fliptop Based on an Ampeg® B15N
• Bass E15 15” + (4 x 10”) Based on David Eden® cabinets
• Bass M1516 10” + 15” + (2 x 6”) Based on a Mesa/Boogie® 1516
MICROPHONES
Select from different microphones, recorded in different positions.
• Dyn 409 Based on a Sennheiser® Echolette 409 (dynamic)
• Dyn 421 Based on a Sennheiser® MD-421 II (dynamic)
• Dyn 57 Based on a Shure® SM57 (dynamic)
• Ribb 84 Based on a AEA® R84 (ribbon)
• Ribb 44 Based on a RCA® 44 (ribbon)
• Dyn RE20 Based on a Electro-Voice® RE20 (dynamic)
• Cond VM1 Based on a Brauner VM1® (condenser)
Bass Mics
• Coil 88 Based on a Beyer® M88 (dynamic moving coil)
• Dyn Based on a RE20 Electro Voice® RE20 (dynamic)
• Dyn 57 Based on a Shure® SM57 (dynamic)
• Cond 87 Based on a Neumann® U87 (condenser)
• Cond GR Based on a Manley® Gold Reference (condenser)
Waves GTR Amp User Guide
12