Waves GTR - Waves GTR Amp Quickstart Guide

Chapter 2 – Quickstart Guide
• When you open the Waves Amp plug-in on a track insert, it’s ready to go
with the default Clean amp.
• Use the Drive control to crank up the gain for more intensity without
changing your output volume.
• For a more distorted tone, choose an amp with more Drive from the Amp
Type menu. Amps are sorted in an escalating gain order.
• Once you’ve selected your amplifier, open up a post-amp PedalBoard.
Reverb, Vibrolo, Delay, EQ, and Compression all work well as post-amp
effects.
• Here’s an example of a possible full setup:
Stomp 6 Mono-to-Stereo PedalBoard with its default preset, followed by a
Stereo Amp, followed by a Stomp 2 Stereo PedalBoard with Vibrolo and
Spring Reverb Stomps.
Waves GTR Amp User Guide
5