Need help?Do you have a question about the Waves WRC-1 and is the answer not in the manual?
General| LAN Ports | 4 x 10/100 Mbps |
|---|---|
| WAN Ports | 1 x 10/100 Mbps |
| Antenna Type | External |
| Frequency Bands | 2.4 GHz |
| Maximum Speed | 1200 Mbps |
| Maximum Data Rate | 1200 Mbps |
| Ports | 4 x LAN, 1 x WAN |
| Security | WPA/WPA2 |
Details the key functionalities and advantages of the WRC-1 Wi-Fi router for live sound engineers.
Identifies and describes the various LAN ports on the rear panel of the WRC-1 unit.
Specifies the DLNA WAN Ethernet port used for network connectivity.
Details the balanced XLR analog audio output connectors for DLNA.
Locates and describes the physical reset switch for the device.
Provides guidance on mounting the WRC-1 near the top of a rack for best wireless performance.
Advises on avoiding interference from other electronic devices and radio waves.
Recommends minimizing physical obstacles between the WRC-1 and connected devices.
Outlines the steps for connecting antennas, power, and network interfaces for basic operation.
Details the specific steps to connect and configure DLNA audio playback.
Guides users through the process of setting a secure password for the 5G Wi-Fi network.
Explains how to perform a factory reset using the router's management software interface.
Describes the method for resetting the WRC-1 using the dedicated rear panel reset switch.
Provides instructions on how to update the WRC-1's firmware via the management interface.
Explains how to modify the router's LAN IP address and DHCP server settings.
To Next Page