Note: If your Android mobile phone support Bluetooth BLE as well, it will scan two
devices. At this moment, please select the device with the MAC address of 00:0E:0E.
Select “Remote control mode”, and click the option Settings to configure the
commands according to the program. When there is key pressed down, it will
trigger corresponding command. And when the key is released and bound up, it
will trigger the “Stop” command.
When the color of the speed button changes from gray to black, it means the
program has been linked. Now, pressing down the key, you can control the smart
robot. At a meanwhile, the RGB LED display different colors.
To Next Page
Loading...
Need help?
General
