Waveshare Pan-Tilt HAT - Get IP Information; Modify main.py File

Pan-Tilt HAT User Manual
Version: V1.0.0; Date: 2019.03.16 13 / 17
4. Get information
Enter web_Python folder: cd Pan_Tile-HAT/web_Python
Type pwd to get the current path information:
Type ifconfig command to get the IP information
Note: I connect the Raspberry Pi to WIFI, so the IP address is wlan0’s, if you
directly connect network jack with cable, the IP address should be eth0’s
5. Modify main.py file: sudo nano main.py
Find os>chdir(‘ ’), change it to the path information you get above and add
/mjpg to the end. for example: