CHAPTER 23 CLICK 301 193
Figure 23.5 – About Tab
e following settings are common to both application drivers:
Settings Description
Driver
Names the driver you are currently working with.
Serial Number
Displays the serial number of your device.
Firmware Version
Shows the version of firmware your device currently has installed. If
Click Supervisor detects a discrepancy between this version and the
most current version it currently has access to, you will be prompted to
upgrade when you connect to the device.
Table 23.4 – About Tab Common Settings
Under the Diagnostics tab, you can run diagnostics on your device (see Figure 23.6). Click
the General or Ethernet buttons to run diagnostics on the items listed below each button.
If a problem is detected, the program will display a red square next to the item in question.
If no problems are detected, a green circle will appear.
To Next Page
Loading...
