Waydoo Flyer EVO USER GUIDES
© 2024 All rights reserved by Waydoo
Ⅵ Maintenance
This product requires regular care and maintenance to ensure it remains in
good working condition and to prevent accidental damage. Please refer to
the detailed guidelines below to understand and become familiar with the
maintenance and storage instructions for the relevant components.
Clean and maintain the product immediately after use. Please note that the
power unit should be cleaned with water. All components of the product
should be kept out of direct sunlight except during use.
Powerflight Battery
Check before use
1. Please read the instructions on the warning sticker on the battery
carefully before daily use.
2. Please carefully check whether the Powerflight Battery is in good
condition with its appearance before use. Using an defect battery may
cause battery damage, electric shock, fire, injury, and property loss.
3. Please make sure to install the battery on the board and connect it with
the power unit, and do a power-on test and various functional checks.
Before launching, check if the battery works well on power on/off,
Bluetooth pairing, indicator lights display and other functions.
Cleaning and maintenance after use
1. After using, please be sure to turn off the remote and battery first. After
both are closed, disassemble the battery, power unit, front and stabilizer
wings and place them in a safe and suitable place.
2. Clean the battery and rinse its surface with water. Use a cotton swab
dipped with alcohol to clean the battery DC ports and buttons. Then
carefully wipe the battery with a dry towel and place it in a dry, cool
environment to remove any remaining moisture. The Powerflight Battery is
highly water resistant, but should be kept as dry as possible and never be
soaked when not in use.
3. Please avoid placing the battery directly on sand, as its surface could be
scratched.
To Next Page
Loading...
