Wayne-Dalton idrive pro 3790 - System Requirements; Tools Needed

Safety Glasses
Phillips Head
Screwdriver
Step Ladder
Ratchet Wrench
7/16” Wrench 5/64” Drill Bit
3/16” Drill Bit
1/8” Drill Bit7/16” Socket
Flat Tip
Screwdriver
Needle Nose Pliers
Level7/16” Socket Driver
Pliers/Wire
Cutters
3/32” Drill Bit
Tape Measure
Pencil
Power Drill
CAUTION TO REDUCE THE RISK OF INJURY, USE THIS OPENER ONLY WITH THE FOLLOWING DOOR MODELS:
System Requirements
Locking Pliers
WAYNE-DALTON
DOOR MODEL
WAYNE-DALTON
SPRING SYSTEM
TRACK (RADIUS)
PHOTOELECTRIC
SAFETY SENSORS
LOW HEAD
ROOM KIT
9000 SERIES
Torquemaster
®
Torquemaster
®
Plus
10",12",14",15" Not Required Not Required
9000 SERIES
Torquemaster
®
Torquemaster
®
Plus
6" Low Head Room Not Required
P/N 302883
Required
8000 SERIES
Torquemaster
®
Torquemaster
®
Plus
10",12",14",15"
P/N’s 252118 or
301674 Required
Not Required
8000 SERIES
Torquemaster
®
Torquemaster
®
Plus
6" Low Head Room
P/N’s 252118 or
301674 Required
P/N 302883
Required
IV
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Vice Clamps
Tools Needed