To Next PageTo Next Page
Need help?Do you have a question about the Wayne CDU800SS and is the answer not in the manual?
General| Model | CDU800SS |
|---|---|
| Category | Water Pump |
| Type | Submersible |
| Discharge Size | 1-1/2 in |
| Power Cord Length | 10 ft |
| Voltage | 115 V |
| Phase | 1 |
| Hertz | 60 Hz |
| Housing Material | Stainless Steel |
| Impeller Material | Thermoplastic |
| Thermal Protection | Yes |
| Switch Type | Vertical Float |
Details electrical requirements, dimensions, and operational levels for the sump pump.
Information on the materials used for motor housing, volute, impeller, and shaft.
Presents pump performance data in gallons per hour at various discharge head heights.
Defines sump pumps and their primary application for basement drainage.
Explains the significance of safety labels like Danger, Warning, and Caution.
Critical instructions on proper electrical connections, grounding, and circuit protection.
Covers safe handling, avoidance of electrical shock, and prohibition of hazardous fluids.
Mandates rigid piping, check valves, and advises against installing damaged units.
Lists unsuitable liquids and applications, recommends backup systems, and states Prop 65 warning.
Advises on tether switch replacement and warns against float switch modifications.
Visual guide illustrating the components and layout of a standard sump pump setup.
Covers code compliance, basin selection, cleaning, and pump placement for optimal switch function.
Guidance on installing discharge piping, check valves, and secure electrical hookup.
Steps for filling the basin, confirming switch operation, and checking discharge flow.
Mandates power disconnection and pump cooling before any servicing or adjustments.
Addresses issues like failure to start, short cycling, and independent shut-offs with causes and remedies.
Details solutions for GFCI trips, noisy operation, improper shut-offs, and low water delivery.
Outlines regular inspections, cleaning, testing, and tether switch replacement for longevity.
Provides visual diagrams of the sump pumps for component identification.
Lists the specific part numbers for float kits and tether switches.
Provides contact details and required information for customer support and parts orders.
Explains warranty periods, coverage, exclusions, and the process for making a claim.
