Wayne VIP50 User Manual

SPECIFICATIONS
POWER SUPPLY REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase
HORSEPOWER 1/2 HP ..................(VIP50)
1/5 HP...................(VIP15)
CIRCUIT REQUIREMENT 15 A (minimum)
LIQUID TEMPERATURE RANGE 40° F- 120° F
620007-001 B 08/18© 2018, WAYNE/Scott Fetzer Company.
CONSTRUCTION
MOTOR HOUSING Thermoplastic
MOTOR SHAFT Stainless Steel
IMPELLER Thermoplastic
VOLUTE Thermoplastic
PUMP DISCHARGE 1-1/4 in. NPT or 3/4 in. Hose Threads
Submersible Multi-Use Pumps
www.waynepumps.com
PERFORMANCE
Model HP Discharge Head 0 ft. 5 ft. 10 ft. 15 ft. 20 ft.
VIP50 1/2 Gal/hr 2600 2160 1680 1080 300
VIP15 1/5 Gal/hr 2050 1740 1350 880 -
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual VIP Series

Wayne VIP50 Specifications

General

Brand	Wayne
Model	VIP50
Category	Water Pump
Language	English

Summary

Specifications

Power Supply Requirements

Motor and Horsepower Details

Circuit Requirement

Safety Signal Words and General Precautions

Safety Signal Words Explained

Defines hazard level signal words like Danger, Warning, Caution, and Notice.

Key Safety Guidelines

Essential safety rules for operating the pump safely, including reading the manual.

Flammable/Explosive Fluid Warning

Prohibition against pumping flammable liquids to prevent fire or explosion.

Maintenance and System Safety Procedures

Disconnecting Power for Service

Emphasizes disconnecting power before any maintenance to prevent shock.

Application Limitations and Safety

Application Limitations

Personal Safety Practices

Qualified Electrician Requirement

Mandates that all electrical wiring be performed by a qualified electrician.

Grounding and Electrical Setup

Instructions for proper grounding and electrical connections for safety.

Wet Area Electrical Hazard

Warns against walking on wet floors until power is confirmed off.

Pump Installation and Operation Safety

Pump Application and Placement

Discharge and Hose Connections

Grounding Prong Warning

Caution against altering the grounding plug to maintain warranty and safety.

Electrical Contact Hazard

Warning against touching the pump or motor while powered or wet.

Grounding Receptacle Requirement

Requirement to use a grounded (GFCI) receptacle to reduce shock risk.

Preventing Dry Running

Automatic Thermal Protector

Operation and Maintenance Safety

Thermal Protector Restart Warning

Warning that a pump with a tripped thermal protector may start suddenly.

Maintenance Safety

Cooling Period Before Servicing

Troubleshooting Chart