SPECIFICATIONS
POWER SUPPLY REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase
HORSEPOWER
1/2 HP ..................(VIP50)
1/5 HP...................(VIP15)
CIRCUIT REQUIREMENT 15 A (minimum)
LIQUID TEMPERATURE RANGE 40° F- 120° F
620007W-001 C 02/19© 2018, WAYNE/Scott Fetzer Company.
CONSTRUCTION
MOTOR HOUSING Thermoplastic
MOTOR SHAFT Stainless Steel
IMPELLER Thermoplastic
VOLUTE Thermoplastic
PUMP DISCHARGE 1-1/4 in. NPT or 3/4 in. Hose Threads
Submersible Multi-Use Pumps
www.waynepumps.com
PERFORMANCE
Model HP
Discharge Head 0 ft. 5 ft. 10 ft. 15 ft. 20 ft.
VIP50 1/2 Gal/hr 2600 2160 1680 1080 300
VIP15 1/5 Gal/hr 2050 1740 1350
880 -
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual VIP Series
To Next Page
Need help?
General
