Wayne RPP50 - User Manual

SPECIFICATIONS
POWER SUPPLY
REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase, Dielectric Oil Filled
HORSEPOWER 1/2 HP............ Sewage (RPP50, SEL50, WCS50T)
Efuent (EFL50)
LIQUID TEMPERATURE 40° F - 120° F
CIRCUIT REQUIREMENTS 15 A (minimum)
DIMENSIONS 14 in. high x 12 in. base (RPP50)
13-1/2 in. high x 11 in. base (SEL50, EFL50)
16-5/8 in. high x 9-5/8 in. base (WCS50T)
ON LEVEL (FACTORY SET) Approximately 16. in. (RPP50)
Approximately 17 in. (SEL50, EFL50)
Approximately 19 in. (WCS50T)
OFF LEVEL (FACTORY SET) Approximately 7.5 in. (RPP50)
Approximately 7 in. (SEL50, EFL50)
Approximately 10.5 in. (WCS50T)
610001-001 B 08/18
CONSTRUCTION
MOTOR HOUSING
Cast Iron (RPP50, WCS50T)
Reinforced Thermoplastic (SEL50, EFL50)
VOLUTE
Cast Iron (RPP50, WCS50T)
Cast Iron
Reinforced Thermoplastic
(SEL50, EFL50)
Glass Reinforced Thermoplastic
IMPELLER Glass Reinforced Thermoplastic
SHAFT Steel
DISCHARGE 2 in. NPT
Sewage/Effluent Pumps
PERFORMANCE
Model HP Discharge Head 0 ft 5 ft 10 ft 15 ft 20 ft
RPP50 ½
Gal / hr 6200 4800 3240 1500 -
SEL50 ½
Gal / hr 10000 9000 7200 5000 2000
WCS50T ½
Gal / hr 10000 9600 8000 3300 -
EFL50 ½
Gal / hr 10000 9000 7200 5000 2000
Intended for Indoor Use Only
RPP50
Sewage- SEL50
Efuent- EFL50
WCS50T
Operating Instructions and Parts Manual Sewage/Effluent
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
© 2018, WAYNE/Scott Fetzer Company.
www.waynepumps.com

Summary

Pump Specifications and Construction

Specifications

Performance Data

Table showing discharge head versus flow rate for different pump models.

Pump Description and Safety Information

Important Safety Information

Highlights critical safety warnings and precautions regarding electrical shock.

Typical Sewage Pump Installation

Installation Procedure

Steps cover basin requirements, pump placement, and plumbing.

Plumbing and Electrical Connections

Typical Effluent Pump Installation

Installation Steps

Covers basin cleaning, pump placement, and float switch clearance.

Discharge and Electrical Setup

Operation and Basin Cover

Troubleshooting Pump Issues

Troubleshooting Warnings

Emphasizes disconnecting power and allowing the pump to cool before servicing.

Common Pump Problems

Addresses issues like pump not starting, stopping too often, or shutting off.

Warranty and Support Information

Contact Information

Limited Warranty Details

Outlines warranty coverage, exclusions, and claim procedures.

Wayne RPP50 Specifications

General

Brand	Wayne
Model	RPP50
Category	Water Pump
Language	English