To Next PageTo Next Page
Need help?Do you have a question about the Wayne WSM3300 and is the answer not in the manual?
General| Brand | Wayne |
|---|---|
| Model | WSM3300 |
| Category | Water Pump |
| Language | English |
Check all included components against the parts list to ensure everything is present.
Safely disconnect AC power before proceeding with installation to prevent electric shock.
Properly install the backup pump and its associated float switch in the sump pit.
Install the appropriate 12-volt deep cycle battery into the battery box.
Connect the controller lid assembly to the battery, ensuring correct polarity.
Connect the various system components, including float switch, DC pump, and phone line.
Place the battery and controller unit in a suitable location near the sump pit.
Configure the controller by selecting language and following on-screen setup instructions.
Understand signal words (Danger, Warning, Caution, Notice) for hazard recognition.
Covers pump usage, electrical safety, battery handling, and California Proposition 65.
Detailed steps for installing the backup pump with a separate discharge line.
Steps for tying the backup pump into the existing AC pump's discharge pipe.
Details on connecting to a phone line, service compatibility, and power outages.
Instructions for entering, storing, and managing phone numbers for notifications.
Procedure to test if the system can successfully call programmed phone numbers.
Simulate alarm conditions to verify notification call functionality.
How to configure the system to work with answering machines or voice mail.
Methods to cancel outgoing alarm calls from the system or remotely.
Details on pump activation, time delays, and the mute function.
Guidelines for maintaining the battery, including charging and terminal care.
Recommendations for using extension cords safely and correctly.
Information on connecting the system to a third-party home security system.
Steps for testing the back-up pump operation and FCC compliance information.
Common problems with the backup pump and their corrective actions.
Troubleshooting steps for controller-related messages and errors.
