Wayne WLS200 User Manual

SPECIFICATIONS
POWER SUPPLY REQUIREMENT 120 V or 230 V, 60 Hz (WLS150)
230 V, 60 Hz (WLS200)
MOTOR Single Phase, Continuous Duty
HORSEPOWER 1 1/2 HP............... (WLS150)
2 HP ................... (WLS200)
CIRCUIT REQUIREMENT 15 A (minimum)
LIQUID TEMPERATURE RANGE 40° F- 120° F
650002-001 B 08/18© 2018, WAYNE/Scott Fetzer Company
CONSTRUCTION
MOTOR HOUSING Coated Steel
MOTOR SHAFT Stainless Steel
IMPELLER Thermoplastic
VOLUTE Cast Iron
PUMP SUCTION 2 in. NPT
PUMP DISCHARGE 1-1/2 in. NPT
Lawn Sprinkler Pump
www.waynepumps.com
PERFORMANCE
Model PSI Discharge Head 5 ft 10 ft 15 ft 20 ft 25 ft
WLS150
15 Gal / hr 4350 4200 3950 3700 3500
20 Gal / hr 3950 3700 3450 3250 3050
25 Gal / hr 3400 3200 3000 2800 2500
30 Gal / hr 2950 2750 2500 2150 1700
WLS200
15 Gal / hr - - 5300 5150 4850
20 Gal / hr 5300 5100 4850 4550 4300
25 Gal / hr 4800 4500 4250 4000 3750
30 Gal / hr 4200 3950 3750 3450 3100
Intended for Indoor Use Only
Operating Instructions and Parts Manual WLS Series
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.

Wayne WLS200 Specifications

General

Brand	Wayne
Model	WLS200
Category	Water Pump
Language	English

Summary

Pump Specifications and Construction

Specifications

Details power supply, motor, horsepower, circuit requirement, and liquid temperature range.

Product Overview and Safety

Installation and Piping Guidelines

General Installation Safety

Further electrical and operational safety guidelines for installation and use.

Pump Piping Installation Advice

Suction Piping Requirements

Requirements for foot valve, pipe diameter, air leaks, and upward slope for suction lines.

Electrical Connections and Wiring

Electrical Connection Guidelines

Guidelines for connecting to a dedicated circuit, grounding, and matching voltage.

Recommended Wiring Data

Chart providing recommended fusing and wire size based on HP, Volt, and distance.

Pump Operation and Maintenance

Operation Safety Precautions

Warnings against running the pump dry or with a closed/clogged discharge.

Priming the Pump Procedure

Step-by-step instructions for filling the pump and suction pipe with water before starting.

Pump Troubleshooting Guide

Troubleshooting Chart

Lists symptoms, possible causes, and corrective actions for pump issues.