EasyManua.ls Logo

weasy SW45 - Drawer; Thread Cutter; Trouble Shooting Guide

weasy SW45
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Lower the presser foot and follow the regular sewing instructions.
DARW
ER
This drawer is a accessory storage compartment.
THRAED
CUTTER
It has a thread cutter on the central left side of machine; it can cut off the thread after
sewing or winging thread.
TRO
UBLE SHOOTING GUIDE
Problem Problem cause Amendment
No power supply or
the machine
runs slowly
Batteries are installed
incorrectly
Reinstall the batteries
making sure they are the
correct way around
Batteries are low
Use new batteries
Adaptor power inadequate
Use compatible adaptor
Skipping stitches
Needle eye not in the
middle
Remove and re-insert the
needle with the flat side of
the needle to the back
Needle bent
Remove and re-insert a
new needle
Presser foot too loose
Tighten the presser foot
Bobbin thread
cannot be
drawn up
Lower thread has been
used up
Replace with new full
bobbin
Needle threaded incorrectly
Re-thread the needle,
making sure it is threaded
from the front to the back