weasy SW45 - Connecting the Sewing Machine to the Mains Power Supply

ACCESSORIES
Foot controller ×1
Thread spool ×2
Bobbin ×2
Needle threader ×1
Needle(#14) ×1
Adaptor ×1
CONNECTING THE SEWING MACHINE TO THE MAINS POWER SUPPLY
1. Connect plug “A” to the machine and plug “B” into the main socket.
2. Connect the foot control “C” to the machine
3. The speed of the machine can be regulated by applying pressure to the foot
controller.
Caution:
Always switch OFF and unplug the machine when not in use.
Output: DC 6V 7.2W
ACCESSORIES