12
GB
Operation
Operation of the timer is designed so that the symbols flash rapidly in setting
mode. If no button is pressed for 5 seconds, the displayed time will be saved.
The display changes at high speed when the buttons or are pressed for
more than 2 seconds.
Switching on
Manually: by pressing the button "Instant heat" .
The heating time and the symbol for heating operation are displayed.
The heating time disappears after 10 seconds.
Automatically
: upon reaching the preset starting time for heating or ventilation.
The program number and the symbol for heating or ventilation are dis-
played.
Switching off
Manually: by pressing the button "Instant heat" .
Automatically
: via the programmed end time. The display field goes out when
the heating time expires.
1533_d.bk : 1533ba_gb.fm Seite 12 Mittwoch, Mai 21, 2003 2:45 PM
To Next Page
Loading...
