13
GB
Setting the time
This function is not available when heating or ventilation mode is active!
Press and hold the button . Press the button "Forward" or "Reverse"
as well.
Release the button .
The time of day is displayed and the clock symbol flashes.
Set the time via the button "Forward" or "Reverse" .
The set time is saved when the display goes out and by pressing the button
Checking the time
Press the button "Forward" or "Reverse" .
The remaining time is displayed if heating or ventilation mode is active.
1533_d.bk : 1533ba_gb.fm Seite 13 Mittwoch, Mai 21, 2003 2:45 PM
To Next Page
Loading...
