Webasto 50 Series User Manual

5 | Maintenance
6 / 8 3317247A_OI_Marine Roof 50 Series
5 Maintenance
1
1
2
Fig.7 Greasing the guides and rails
1. Clean the roof regularly.
2. Wash the glass panel with clean water and a soft cloth,
chamois, or sponge. Never rub a dry surface. Do not use
abrasive, or harsh solutions such as turpentine or mineral
spirits when cleaning glass panels.
3. Wash the remainder of the roof with warm water using a
professional marine-grade cleaning product. Rinse with
clean water.
4. Apply a thin layer of grease (Isoflex® Topas L32) to the in-
side of the guides (1) and rails (2) to ensure smooth sliding.
Available through Webasto.
• Never use:
– Alkaline products containing sodium solutions.
– Acid products like muriatic or those containing phos-
phor.
– Steel wool, abrasives or sandpaper.
– Alkaline-containing cleaning products for glass, as these
can corrode aluminium.
6 Troubleshooting
Symptom Possible cause Possible solution
Poor opening / tilt-
ing of the roof.
Polluted seal. Clean the seal with
a mild detergent
and repeat opening/
closing the roof.
Poor roof move-
ment.
Polluted guides and
rails.
Clean the inside of
the guides and rails.
Apply a thin layer of
grease to the inside
of the guides and
rails. See chapter5,
"Maintenance" on
page 6.
If the roof still does not operate smoothly, please contact your
boat manufacturer for maintenance and / or repair.

Webasto 50 Series Specifications

General

Category	Boating Equipment
Model	50 Series
Dimensions	Varies by model
Weight	Varies by model
Heating Capacity	5, 500 BTU/hr (Heat Pump Models)